Joker XL Sportfield Harrow

Golf course

🇫🇷 Made in France

A machine for your fairways semi-roughs teeing areas

Joker XL Golf has been developed in collaboration withAGREF for greenkeepers who maintain their lawns without pesticides.

Its versatility is appreciated for maintaining different areas of the golf course: fairways, semi-roughs or pre-roughs mowed to around 10 cm.

With a working width of 3.60 or 4.60 meters, the machine is made up of 3 independent tine plates, which perfectly follow the relief of the soil.

The Joker XL is ideal for dethatching, treating earthworm castings and restoring flatness.


Its high tooth density ensures maximum efficiency in a single pass (up to 40,000 m²/hour).

functionalities

defeutrage

DETHATCHING

MECHANICAL WEEDING

Removes moss, felt and low-rooting undesirables.

The teeth straighten and sever the leaves of deep-rooted undesirables (plantain, paspalum, dandelion, foxtail, crabgrass) to weaken them.

turricule de ver de terre

MECHANICAL TREATMENT OF WORM CASTINGS

Explodes earthworm castings without removing plant matter.

Thanks to the height-adjustable tine plate, the tines can be adjusted so that they skim the surface without resting on the ground.

reprise de planéité

FLATNESS RESTORATION

The tines’ forward/backward movement displaces material restoring evenness to the soil.

lawn aesthetics

Passing through the Joker before mowing straightens the strands, for a clean, even cut.

why choose Jokerxl?

joker articulé replié

easy to move

  • Double-acting hydraulic cylinders.
  • Folding wings for easy storage and transport between fairways.

The highest efficiency on the market

  • 184 teeth/sq.m.
  • Fast, even work: output up to 40,000 m²/h
  • Working speed: between 8 and 12 km/h
Attelage

3-POINT HITCH

  • Pressurizes teeth according to desired aggressiveness
  • Compatible with standard tractors
  • Fast, safe lifting

Swivel gauge wheels

  • Pivoting: simplified manoeuvring
  • Maintenance-free, with integrated scrapers
  • Precise adjustment of working height

Teeth movement

  • Optimum material upwelling
  • Superior efficiency
  • Vertical action performing a forward/backward vibratory movement.

flatness restoration

  • Unlike agricultural tines, which follow the ground without levelling out, the Joker’s tines, fixed to the bed, enable levelling out.
  • Result: a flat, stable and uniform surface.

options

Basic model

3600 or 4600

D5 or D6 teeth

Harrow Kit

Seeder Kit

The Joker XL can be fitted with a pneumatic seeder (capacity: 120 or 300 liters) to carry out overseeding operations over a width of 3.60 m or 4.60 m, guaranteeing outstanding yields.

  1. When the seeder comes into action, the fan blows the seed through the pipes to the diffusers, distributing the seed perfectly evenly.
  2. This is then brought into contact and mixed with the soil by the action of the tines, ensuring optimum grass emergence.
  3. A control in the tractor cab can be used to deactivate seed delivery to areas not requiring replanting.
Seed distributor
The seed is blown forward between the tines.

TOOTH DIAMETER

Different tooth sections are available (5 mm or 6 mm diameter):

D5 – Multi-purpose teeth for routine maintenance.

D6 – Teeth for more effective weeding of large-leaved weeds (plantain, dandelion, paspalum, foxtail, crabgrass) than D5.

HARROW KIT

It scatters the material that falls from the wheel scrapers when processing earthworm castings.

Technical specifications

Joker 3600 D5

Operating width 3.60 m
  • Height: 1.10 mm
  • Length: 1.50 mm
  • ø Hitch axle lift arm Cat 1 (22 mm) or Cat 2 (28.7 mm)
  • ø 3-point linkage : Cat 1 (19 mm)or Cat 2 (25.7 mm)
  • Machine weight: 347 kg
  • Number of tines on main plate: 161
  • Main rake size: 1.60 m
  • Tine count per wing: 101
  • Wing size: 1.00 m
  • Spacing of tines: 4.6 mm
  • Minimum power requirement: 40 HV

Joker 4600 D5

Operating width 4.60 m
  • Height: 1.10 mm
  • Length: 1.50 mm
  • ø Lifting arm coupling pin : Cat 1 (22 mm) or Cat 2 (28.7 mm)
  • ø 3-point linkage : Cat 1 (19 mm) or Cat 2 (25.7 mm)
  • Machine weight: 410 kg
  • Number of tines on main plate: 161
  • Main rake size: 1.60 m
  • Tine count per wing: 101
  • Wing size: 1.00 m
  • Spacing of tines: 4.6 mm
  • Minimum power requirement: 40 HV

Joker 3600 D6

Operating width 3.60 m
  • Height: 1.10 mm
  • Length: 1.50 mm
  • ø Hitch axle lift arm Cat 1 (22 mm) or Cat 2 (28.7 mm)
  • ø 3-point linkage : Cat 1 (19 mm)or Cat 2 (25.7 mm)
  • Machine weight: 380 kg
  • Number of teeth: 313
  • Main rake size: 1.60 m
  • Wing size: 1.00 m
  • Spacing of tines: 5 mm
  • Minimum power requirement: 50 HP

Joker 4600 D6

Operating width 4.60 m
  • Height: 1.10 mm
  • Length: 1.50 mm
  • ø Lifting arm coupling pin : Cat 1 (22 mm) or Cat 2 (28.7 mm)
  • ø 3-point hitch : Cat 1 (19 mm) or Cat 2 (25.7 mm)
  • Machine weight: 450 kg
  • Number of teeth: 401
  • Main rake size: 1.60 m
  • Wing size: 1.00 m
  • Spacing of tines: 5 mm
  • Minimum power requirement: 80 HP

French Manufacturing

France

Proud to offer you French-made machines, we pay particular attention to quality in the choice of materials and the manufacturing process.

The machines are manufactured in our workshops in Alsace. Our aim is to create products that are reliable and easy to use.

Tailor-made solutions are available for specific situations.

Raw materials come mainly from France, Germany and Italy.

CONTACT

do you have a question about this machine?

Leave us your contact details and we’ll get back to you as soon as possible.

they trust us

golf de chiberta
Golf de Chiberta
golf dijon
Golf de Dijon
golf
Golf de Morfontaine
golf lyon
Golf de Lyon
golf vaucouleurs
Golf de la Vaucouleurs
golf commanderie
Golf de la Commanderie

Testimonials

Pierre-Yves Raoult, head of the parks and gardens division, in charge of the golf course of the city of Chalon-sur-Saône

With its 18 holes, 6 practice holes, a driving range and a putting green, the municipal golf course of Chalon-sur-Saône (France, 71) had a major problem: the presence of worm castings.

“Starting each October, especially when humidity levels start rising, all of our fairways become overrun with worm casts. This is really not the ideal situation for the game and the turf!

We had tested different solutions. But during a demonstration day, we were blown away by the performance of the ‘Joker’ harrow.

Given the excellent quality/price ratio and the minimal maintenance, we said to ourselves, ‘Why not use it on our course?’ And that’s exactly what we did.

The result: We are very satisfied with it! We even recommend it for the maintenance of sports grounds (rugby, soccer, etc.). In addition, beyond the fact of ‘pulverizing’ the castings, this 4m-wide rake allows for light turf scarification. It will also nicely prepare the soil before seeding; the ground is ‘clawed’ so to speak.

Some interesting options are also available, such as the broom that can be secured behind the rake. It redistributes the castings for a perfectly flat surface. The Harrow Kit can also be used to maintain sanded pathways without destructuring the soil.

Last but not least, I also find the accessory storage rack, offered by Hege, convenient for storing the brushes, the broom…”

golf