JOKER SPORTSFIELD HARROW

EASY. VERSATILE.

The machine for all your surfaces: turf, mineral, synthetic, …

The machine for your natural mineral, and synthetic surfaces.

The basic model and its interchangeable attachments enable you to service turf, mineral and synthetic surfaces.

The harrow is a highly valued tool for the care of sports facilities without resorting to pesticide use.

Various widths are available: 2.10 m, 1.80 m, 1.50 m or 1.20 m.

We also offer wider versions for golf course and racecourse maintenance (3.60 m or 4.60 m).

For smaller areas, discover a 0.80 m version, the Joker XS.

For customized solutions, do not hesitate to contact us.

An brief overview of its features

  • Disintegrates worm castings, improving the lawn’s evenness.
  • Pulls out grasses with a shallow root system.
  • Uproots thatch and moss by pulling out unwanted vegetation.
  • Enables oxygen and nutrients to better seep into the soil.
  • Improves the compliance and evenness of stabilized surfaces.
  • Eliminates undesirable vegetation.
  • Mechanical weed control on low-graded mineral surfaces (stabilized, shale, cinder, gravel, etc.).
  • Decompacts the aggregate of synthetic fields improving their compliance and permeability.
  • Restores the fibers to an upright position.

Key features

  • Easy and precise calibration of the spring-loaded tines’ level of attack by actuation of the push bars.
  • Suitable for operating in wet conditions.
  • Narrow tine spacing: 4.6 mm
  • Steerable gauge wheels for convenient, track-free handling.

Documentation

Download the brochure

To download

DOCUMENTATION

Brochure : Maintenance of urban spaces

To download

NEW

Seeder Assembly product sheet

To download

DOCUMENTATION

Available attachments

RAKE ASSEMBLY
2 possible settings: stiff or floating.

Kit désherbage

MECHANICAL WEED CONTROL ASSEMBLY
Pesticide-free weeding of mineral surfaces.

Brosse

BRUSH ASSEMBLY
For Leveling and grooming.

kit rouleau

NEW: ROLLER ASSEMBLY

Improves soil evenness in the winter months.

Firms the surface when reseeding.

FRONT ASSEMBLY

Allows the machine to be attached to the front of the tractor.

Breaks up worm castings before the wheels pass over.

kit semoir

SEEDER ASSEMBLY
Pneumatic seed drill, capacity 120 liters. 12 V power supply.

Kit bordure

EDGING ASSEMBLY
To be secured to the mechanical weeding assembly.

FRONT WHEEL KIT

Follows the contours of the ground to ensure even work across the entire surface.

timon mécanique

TRACTION DRAWBAR
3-point mechanical, for vehicles not fitted with hydraulic lift arms.

timon hydraulique

TRACTION DRAWBAR
3-point hydraulic, for vehicles not fitted with hydraulic lift arms.

support de rangement

STORAGE RACK FOR THE DIFFERENT ASSEMBLIES

Technical benefits

Roue farmflex

MAINTENANCE-FREE FARMFLEX® WHEELS
Swivel for easy handling. Tire scrapers.

Dents

HIGH LEVEL OF EFFICIENCY
184 tines/m². The vertical tines produce a vibratory forward/backward movement. An easy calibration of the tines’ level of attack.

Attelage

3-POINT HITCHING
Category 1 for hydraulic lift.

Technical specifications

Joker 2100

Joker 2100

Operating width 2.10 m
  • Height : 0.84 m
  • Length : 1.34 m
  • ø Lifting arm coupling pin : Cat 1 (22 mm)
  • ø 3-point hitch : Cat 1 (19 mm)
  • Machine weight : 135 kg
  • Tine count on the rake: 221
  • Tine count on the rear module: 37
  • Tine spacing: 4.6 mm
  • Minimum power requirement: 30 HP
Joker 1800

Joker 1800

Operating width 1,80 m
  • Height : 0.84 m
  • Length : 1.34 m
  • ø Lifting arm coupling pin : Cat 1 (22 mm)
  • ø 3-point hitch : Cat 1 (19 mm)
  • Machine weight : 135 kg
  • Tine count on the rake: 189
  • Tine count on the rear module: 31
  • Tine spacing: 4.6 mm
  • Minimum power requirement: 30 HP
  • Blade count on the mechanical weed control assemblay: 11
Joker 1500

Joker 1500

Operating width 1.50 m
  • Height : 0.84 m
  • Length : 1.34 m
  • ø Lifting arm coupling pin : Cat 1 (22 mm)
  • ø 3-point hitch : Cat 1 (19 mm)
  • Machine weight : 98 kg
  • Tine count on the rake: 157
  • Tine count on the rear module: 27
  • Tine spacing: 4.6 mm
  • Minimum power requirement: 20 HP
  • Blade count on the mechanical weed control assemblay: 9
Joker 1200

Joker 1200

Operating width 1.20 m
  • Height : 0.84 m
  • Length : 1.34 m
  • ø Lifting arm coupling pin : Cat 1 (22 mm)
  • ø 3-point hitch : Cat 1 (19 mm)
  • Machine weight: 78 kg
  • Tine count on the rake: 125
  • Tine count on the rear module: 23
  • Tine spacing: 4.6 mm
  • Minimum power requirement: 15 HP
  • Blade count on the mechanical weed control assemblay: 7

Joker 1000

Operating width 1,00 m
  • Height : 0.84 m
  • Length : 1.34 m
  • ø Lifting arm coupling pin : Cat 1 (22 mm)
  • ø 3-point hitch : Cat 1 (19 mm)
  • Machine weight: 63 kg
  • Tine count on the rake: 103
  • Tine count on the rear module: x
  • Tine spacing: 4.6 mm
  • Minimum power requirement: 15 HP
  • Blade count on the mechanical weed control assemblay: 6

French Manufacturing

France
Proud to offer you French-made machines, we pay particular attention to quality in the choice of materials and the manufacturing process. Our machines are fabricated in our workshops in Alsace. We strive to create reliable and easy-to-use products. Customized solutions are possible for specific needs. Our raw materials are sourced in France.

References

With decades of experience as a service provider in the field of sports floors, Hege has been able to engineer a machine with unmatched benefits, satisfying hundreds of users.

The following are some of our references.

Parks

Versailles
Château de Versailles
Palais de l'Elysée
Palais de l'Elysée
Toulouse
Toulouse

STADIUMS

Saint-Etienne
Saint-Etienne
Toulouse Club Football
Toulouse
Belgique
Royal Belgian Football Association
Strasbourg
Strasbourg
chalon
Chalon-sur-Saône
compiegne
Compiègne
stade charléty
Stade Charléty - Paris
bourges
Bourges

LANDSCAPERS

Testimonials

Blog